Variety Hall Road, Coimbatore, Tamil Nadu
Send E-mail
Send SMS
Home»Our Products»

RCC And Wooden Cooling Towers

Our range of products include rcc cooling towers, wooden cooling towers, induced draft wooden cooling towers, reinforced concrete cement cooling towers, wooden fills cooling towers and induced draft wooden cooling tower.

REQUEST CALLBACK
Approx. Rs 15,000 / Pc_Onwards
Get Best Quote

RCC Cooling Towers, offered by us are made using high-grade material based on quality parameters set by the industry. We tend to offer customization of the products on the basis of types and shapes.

 

Features:

 

  • RCC structure is designed to give maximum efficiency while retaining structural stability.
  • Choice of aerodynamic PVC - “S” type or “C” type Drift Eliminators.
  • The distribution system is with the latest design of nozzles to ensure a proper distribution of water.
  • Easy to clean and maintain. Highly reduced cost of maintenance.
  • The fill media is of Virgin PVC fills, with double edge folding at the edges. This results in a very long life of fill media.
Request a Quote
REQUEST CALLBACK
Approx. Rs 15,000 / Pc_Onwards
Get Best Quote
We are engaged in manufacturing and exporting highly efficient Wooden & RCC Cooling Tower. These towers are offered with 91 models available under single cell configuration. The uses of multi-cell configuration help in the flexibility of operation and meet better cooling requirements. These cooling towers are supplied with treated timber construction, which is pressure treated with copper chromate arsenic. Structural design for operational load and wind pressure of 30 PSI is taken into consideration.

Specifications:
Item Material of Construction
Structure Treated Timber
Fill Treated Timber /PVC
Fill Support GRP Grids / SS Grids
Drift Eliminator Treated Timber 2 Pass /PVC
Drift Eliminator Support Marine Plywood /PP
Structural Connector FRP Rings
Nozzle Polypropylene (PP)
Hardware's HDG.MS/SS
Nails Screw Shank SS
Fan Assembly Cast Aluminum Alloy /GRP Bladed
Fan Cylinder FRP
Gearbox Worm/Spiral Bevel
Drive Shaft Floating HDG.MS
Casing & Louvers Corrugated AC Sheet/Corrugated FRP Sheet
Electric Motor To Suit Country Specific
Cold Water Basin RCC (By Purchase Ser-Drawing Provided)
Request a Quote
REQUEST CALLBACK
Approx. Rs 15,000 / Pc_Onwards
Get Best Quote
We are engaged in manufacturing and exporting highly efficient Wooden & RCC Cooling Tower. These towers are offered with 91 models available under single cell configuration. The uses of multi-cell configuration help in the flexibility of operation and meet better cooling requirements. These cooling towers are supplied with treated timber construction, which is pressure treated with copper chromate arsenic. Structural design for operational load and wind pressure of 30 PSI is taken into consideration. 

Specifications:

Item Material of Construction
Structure Treated Timber
Fill Treated Timber /PVC
Fill Support GRP Grids / SS Grids
Drift Eliminator Treated Timber 2 Pass /PVC
Drift Eliminator Support Marine Plywood /PP
Structural Connector FRP Rings
Nozzle Polypropylene (PP)
Hardware's HDG.MS/SS
Nails Screw Shank SS
Fan Assembly Cast Aluminum Alloy /GRP Bladed
Fan Cylinder FRP
Gearbox Worm/Spiral Bevel
Drive Shaft Floating HDG.MS
Casing & Louvers Corrugated AC Sheet/Corrugated FRP Sheet
Electric Motor To Suit Country Specific
Cold Water Basin RCC (By Purchase Ser-Drawing Provided)
Request a Quote
REQUEST CALLBACK
Approx. Rs 15,000 / Pc_Onwards
Get Best Quote
We are engaged in manufacturing Induced Draft Wooden Cooling Towers. These towers have multi-blade cast aluminum adjustable pitch fan attached with a hub. A motor is provided with the system for low RPM, T.E.F.C. The IP – 55 construction of the tower makes it suitable for intense and humid atmosphere. These towers are manufactured using HDG steel that makes the structure lighter and durable. The joints are bolted with GI bolts and SS Nails. The towers are equipped with spray target nozzles that help in uniform water distribution. Moreover, the standard cladding of profile corrugated asbestos cement sheet, the joints of which are lapped to shed water only inside the cooling tower. To assure positive and permanent positioning the treated wooden fills are supported on FRP grids.
Request a Quote
REQUEST CALLBACK
Approx. Rs 15,000 / Pc_Onwards
Get Best Quote


Request a Quote
REQUEST CALLBACK
Approx. Rs 15,000 / Pc_Onwards
Get Best Quote

Request a Quote
REQUEST CALLBACK
Approx. Rs 15,000 / Pc_Onwards
Get Best Quote


Request a Quote
REQUEST CALLBACK
Approx. Rs 15,000 / Pc_Onwards
Get Best Quote
We are engaged in manufacturing and exporting highly efficient Wooden Cooling Tower. These towers are offered with 91 models available under single cell configuration. The uses of multi-cell configuration help in the flexibility of operation and meet better cooling requirements. These cooling towers are supplied with treated timber construction, which is pressure treated with copper chromate arsenic. Structural design for operational load and wind pressure of 30 PSI is taken into consideration. 

Specifications:
Item Material of Construction
Structure Treated Timber
Fill Treated Timber /PVC
Fill Support GRP Grids / SS Grids
Drift Eliminator Treated Timber 2 Pass /PVC
Drift Eliminator Support Marine Plywood /PP
Structural Connector FRP Rings
Nozzle Polypropylene (PP)
Hardware's HDG.MS/SS
Nails Screw Shank SS
Fan Assembly Cast Aluminum Alloy /GRP Bladed
Fan Cylinder FRP
Gearbox Worm/Spiral Bevel
Drive Shaft Floating HDG.MS
Casing & Louvers Corrugated AC Sheet/Corrugated FRP Sheet
Electric Motor To Suit Country Specific
Cold Water Basin RCC (By Purchase Ser-Drawing Provided)
Request a Quote
X
 

Download Brochure
Janani Enterprises, Coimbatore

K. Vijayakumar (CEO)
59, Variety Hall Road
Coimbatore - 641001
Tamil Nadu, India
Send Email
© Janani Enterprises, Coimbatore. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited